40
null

A Comprehensive Guide to Setting Up Wavlink AX1800

Welcome to the thorough setup Tutorial for the Wavlink AX1800 Extender! The Wavlink AX1800 Extender improves your current WiFi network by extending coverage and boosting signal strength throughout your house or place of business, ensuring a stable and strong WiFi connection for staying connected.

The Wavlink AX1800 Extender setup can help if you're experiencing dead areas, slow internet speeds, or poor connectivity. This manual will take you step by step through the process of setting up and configuring your extender, ensuring that you have perfect internet connectivity throughout your whole area.

How to setup Wavlink AX1800 Manually?

The following steps to manually set up a Wavlink AX1800 extender are provided below:

  • Connect the Wavlink AX1800 extender to a power outlet within the WiFi range of your router.
  • Watch for the LED lights on the extender to stabilize. 
  • Join the WiFi network 'Wavlink_Ext' on the extender to use your PC or mobile device.
  • 'http://ap.setup' or 'http://192.168.10.1' should be typed into the address bar of a web browser after it has been started.
  • The Wavlink extender setup page will be displayed.
  • Follow the instructions displayed on screen.
  • From the list of available networks, select your network.
  • For the wider network, you have the option of setting up a new SSID and password.
  • After completing the configuration, wait for the extender to reboot.
  • Once it has come back online, move the extender to a location with poor WiFi coverage.
  • To get better coverage, join a wider WiFi network with your devices.

Wavlink AX1800 setup Using WPS method

step by step guide to Wavlink AX1800 extender setup using the WPS (WiFi Protected Setup) method:

  • Turn on the extender using the power button.
  • Locate the WPS button on both your router and the extender.
  • Press the WPS button on the extender. Hold it down for a few seconds.
  • During this process, the WPS LED on both devices may blink.
  • Once the WPS LED on both the router and extender becomes steady or stops blinking, it indicates a successful connection.
  • Find a suitable location for your extender.
  • The extender might create a new network with "_EXT".
  • Connect your devices to the extender's network and test the internet connectivity. 

The Wavlink AX1800 extender setup via WPS method is now finally complete. Make sure you're getting a strong signal and good speeds in the areas that need coverage.

How to Perform a Factory Reset on Wavlink AX1800 ?

Here is a brief description of the Wavlink AX1800 extender setup procedure, along with instructions on how to perform a factory reset on it:

  • Locate the reset button on the extender,which is often marked by a tiny pinhole.
  • While the extender is turned on, press and hold the reset button for around 10 seconds.
  • After holding the reset button down for ten seconds, let go.
  • It will reset the extender to its factory default settings.
  • Give the rextender a few minutes to restart.
  • Access the extender’'s web interface using the default login credentials (typically admin/admin or admin/password).
  • Change any necessary extender configurations, including those for the WiFi network and internet.

Firmware Update for Wavlink AX1800 

steps for updating the firmware of a Wavlink AX1800 extender:

  • Join your PC or mobile device to the network of the extender.
  • Start a web browser (such as Firefox or Chrome).
  • Enter the default IP address of your extender into the address bar and press Enter.
  • Enter the admin username and password 
  • Look for a "Firmware Update" or "System" section in the web interface.
  • Visit the Wavlink official website and navigate to the support or downloads section.
  • Find your extender model and download the latest firmware file.
  • Wait for the update to complete. Do not interrupt power during this process.
  • After the update, the extender will likely automatically reboot.
  • Log in again to the web interface to confirm that the firmware version has been updated.

Ensure that the firmware update of the Wavlink AX1800 extender is successfully completed. Test the extender to verify its proper functionality after the update.

Troubleshooting Tips:

While installing the Wavlink AX1800 Extender Setup you may face some issues. Here are the troubleshooting steps for setting up a Wavlink AX1800 extender :

  • Ensure the extender is positioned within the optimal range of your router's signal.
  • Confirm the extender is powered on and its LED indicators are active.
  • If issues persist, reset the extender to factory settings using the reset button.
  • Connect to the extender's default network (usually "WavlinkExt") on your device.
  • Open a web browser and enter the extender's IP address (e.g., 192.168.0.1) to access the setup page.
  • Use default or configured credentials to log in to the extender's setup page.
  • Select your home WiFi network from the list and enter its password.
  • Configure a new SSID and password for the extended network.
  • Save and apply the changes. Allow the extender to reboot.
  • Disconnect from the extender's network and reconnect to your extended network.
  • In various rooms of your house, check the signal strength of the extended network.
  • Check for firmware updates on Wavlink's official website and apply if available.
  • Minimize interference from electronic devices or neighboring networks.
  • Ensure your devices support the AX (WiFi 6) standard for optimal performance.
  • If problems persist, consult the extender's manual or contact Wavlink's customer support.

These are general troubleshooting steps, and specific steps may vary depending on your extender model and firmware version. Always refer to the official setup guide provided by Wavlink for the most accurate instructions.



Related Articles