309
null

The reasons for the inaccurate filling of water production line

The 3-5 gallon water filling machine consists of racks, water tanks, pipes, pumps, cylinders, transmissions, electrical appliances, etc. It completes empty barrel flushing, filling, capping and other actions. Through multiple flushing processes, quantitative filling, automatic capping. All the the movements are all controlled by computer to achieve stable flushing effect, precise filling capacity and sealing capping effect.


5 gallon filling machine1.jpg

The 3-5 gallon barreled water filling machine is used for the production of 3-5 gallon barrels of drinking water. The bottle washing machine adopts multi-channel washing liquid spray and disinfectant spray to achieve the purpose of washing and disinfection, and the disinfectant can be recycled. The sealing machine can automatically seal, and the bottle cap is equipped with a shower device during the conveying process to ensure that the bottle cap is sterile and clean. 

The following will explain to you the reasons for the failure of the large bucket of water equipment to fill the volume or not to fill the material:

1. Whether the speed throttle valve and the filling interval throttle valve are closed, the throttle valve cannot be closed;

2. Check whether there is any foreign matter in the quick-installing three-way control valve. If so, please clean it up. Check whether there is air in the quick-installing three-way control valve and the leather tube of the filling head. If there is air, try to reduce or eliminate the air;

3. Whether all sealing rings are damaged, if damaged, please replace with new ones;

4. Check whether the valve core of the filling nozzle is jammed or delayed to open. If there is a jam, the valve core should be re-installed. If the opening is delayed, the throttle valve of the thin cylinder needs to be adjusted;

5. The elastic force of the coil spring is compressed up and down in the quick-installed three-way control valve, and the elastic force of the spring is adjusted. If the elastic force is too large, the check valve will not be opened;

6. Whether the filling speed is too fast, adjust the filling speed throttle valve to reduce the filling speed;

7. Check and correct whether all clamps and leather pipe buckles are well sealed;

8. Whether the magnetic switch is loose, please lock it after each adjustment.

The above eight points are the reasons for the inaccurate filling volume of the vat water equipment or the unfilled material. If you still have any questions, please feel free to contact Comark Machinery. 


Related Articles