Introduction
Working with a commercial truck involves various movements and actions that can lead to a greater risk of strains, sprains and other injuries. Some examples of such movements or actions are:
• Working in uncomfortable or awkward postures. For example, bending forward, reaching over your shoulder height, twisting and more.
• Using force, especially after sitting ideal for a long time, such as when cranking gear under tension.
• Repeating tedious movements quite frequently.
• Holding the same positions for hours.
Now, you must be wondering how to lower the risk of injury with landing gear safety improvement efforts. Well, the answer is very simple. All you need to use on-lift pneumatic air-powered trailer landing gear.
The technology of Automatic Landing Gear
The pneumatic automated landing gear has a unique technology that is based on air power supplied by the truck's EBS- Emergency Brake System. It, then, triggers a powerful and high-precision pneumatic motor system that runs at a speed of around 220 RPM. After that, it efficiently lowers and raises landing gear as well as a stabilizer on trailers. The best part is that for this, you don't need to use any auxiliary power such as hydraulics, batteries, etc.
The technology works flawlessly on any landing gear system. That means you don’t need to change your existing gear system to use it.
Does it come with any locking mechanism?
It may be noted that the design of the landing gear prevents the legs from moving from their place without human intervention. Besides, the tool comes with an air on and off switch located inside the primary control box. When you turn it off, it will prevent the movement of air to the control valve. That means the leg won’t move down or up until you turn the switch on. So, with this, you can ensure a better landing gear safety improvement.
Is it a good idea to get the air from EBS?
As per the experts, the utilization of the air from the truck emergency brake system is completely safe. Besides, this is efficient and reliable for powering your automatic trailer landing gear. On the other hand, the installation process meets the FMVSS standard. So, while using this, you don't have to worry about the performance of the truck's emergency brake system. Furthermore, utilizing the emergency brake system for to power your automatic landing gear is also quite efficient, as it generates constant pressure. The use of the EBS will not affect the trailer's operation when it is parked.
Maintain Your Automatic Landing Gear
With preventive maintenance, truck drivers can witness easier operation, and this will also not affect the body. Experts say you should carry out a pre-trip inspection. Besides, always follow the guidelines offered by the manufacturers to use it properly and make a maintenance schedule. Proper maintenance can keep the landing gear running for years.
Final Thoughts
For a quicker
landing gear safety improvement, it is crucial to invest in the best automatic landing gear. These tools are designed and approved by OSHA to make the trailer handling process easier and faster. If you are looking for a reliable supplier of automatic landing gear, then get in touch with Patriot Lift now. They offer the latest On-Lift Model 2000 automatic landing gear that can easily lift trailers weighing around 70,000 lbs. Using this, one can lower and raise the landing gear within just 10 seconds. Contact them now for more information.
Enjoy Pneumatic Trailer Operation With Automatic Landing Gear
Introduction
Working with a commercial truck involves various movements and actions that can lead to a greater risk of strains, sprains and other injuries. Some examples of such movements or actions are:
• Working in uncomfortable or awkward postures. For example, bending forward, reaching over your shoulder height, twisting and more.
• Using force, especially after sitting ideal for a long time, such as when cranking gear under tension.
• Repeating tedious movements quite frequently.
• Holding the same positions for hours.
Now, you must be wondering how to lower the risk of injury with landing gear safety improvement efforts. Well, the answer is very simple. All you need to use on-lift pneumatic air-powered trailer landing gear.
The technology of Automatic Landing Gear
The pneumatic automated landing gear has a unique technology that is based on air power supplied by the truck's EBS- Emergency Brake System. It, then, triggers a powerful and high-precision pneumatic motor system that runs at a speed of around 220 RPM. After that, it efficiently lowers and raises landing gear as well as a stabilizer on trailers. The best part is that for this, you don't need to use any auxiliary power such as hydraulics, batteries, etc.
The technology works flawlessly on any landing gear system. That means you don’t need to change your existing gear system to use it.
Does it come with any locking mechanism?
It may be noted that the design of the landing gear prevents the legs from moving from their place without human intervention. Besides, the tool comes with an air on and off switch located inside the primary control box. When you turn it off, it will prevent the movement of air to the control valve. That means the leg won’t move down or up until you turn the switch on. So, with this, you can ensure a better landing gear safety improvement.
Is it a good idea to get the air from EBS?
As per the experts, the utilization of the air from the truck emergency brake system is completely safe. Besides, this is efficient and reliable for powering your automatic trailer landing gear. On the other hand, the installation process meets the FMVSS standard. So, while using this, you don't have to worry about the performance of the truck's emergency brake system. Furthermore, utilizing the emergency brake system for to power your automatic landing gear is also quite efficient, as it generates constant pressure. The use of the EBS will not affect the trailer's operation when it is parked.
Maintain Your Automatic Landing Gear
With preventive maintenance, truck drivers can witness easier operation, and this will also not affect the body. Experts say you should carry out a pre-trip inspection. Besides, always follow the guidelines offered by the manufacturers to use it properly and make a maintenance schedule. Proper maintenance can keep the landing gear running for years.
Final Thoughts
For a quicker landing gear safety improvement, it is crucial to invest in the best automatic landing gear. These tools are designed and approved by OSHA to make the trailer handling process easier and faster. If you are looking for a reliable supplier of automatic landing gear, then get in touch with Patriot Lift now. They offer the latest On-Lift Model 2000 automatic landing gear that can easily lift trailers weighing around 70,000 lbs. Using this, one can lower and raise the landing gear within just 10 seconds. Contact them now for more information.
Related Articles