Before you start configuring the Linksys RE6300 extender, make sure you have the following requirements:
You'd have access to high-speed internet.
For the home wireless router, it should be up and running.
Try to recall the name of the wireless network as well as the passphrase.
Connect a power supply electrical port to the wireless range extender.
How to Setup Linksys RE6300?
The manual setup of the Linksys extender and the WPS system are two options for setting up the Linksys RE6300 WiFi extender. The best part about all of these Linksys extender configuration procedures is that they don't include a CD or system installation.
Instructions for Linksys RE6300 Setup
Connect the Linksys RE6300 extender to your home wireless router with an Ethernet cable.
Attempt to connect your device to the router at this stage.
Switch on your screen and open all of your favorite web browsers.
Select extender.linksys.com in the web address bar and press the Enter key.
You'll be taken to the Linksys RE6300 Extender Configuration tab.
Enter the Linksys RE6300 login's default passwords.
To log in, click the button.
The web browser will take you to the Linksys extender's admin panel.
To set up your RE6300 computer, simply follow the instructions on the screen.
Keep pressing the Save button until it's over.
If you have any concerns about how to install the Linksys Extender Setup, please contact us. Contact us using the live chat function.
WPS Button Setup
The safest way to set up your home WiFi router with the Linksys RE6300 extender is to use WiFi Secure Configuration (WPS). For configuring Linksys RE6300, only follow the WPS method guidelines mentioned below:
At home, connect your Linksys RE6300 to a power outlet close to your WiFi router.
On the side of your wireless RE6300 extender, press the WPS button. The light will turn green as it blinks.
After that, unplug the Linksys extender and relocate it away from the electrical power outlet.